Seamless 90° corners through special 45° cutter cabinets.
Seamless 90° corners through special 45° cutter cabinets.
Features:Curve configurations both concave and convex through curving mounting plates:
• 0-10° Concave (10° - 5° - 2°)
• 0-5° Convex (5° - 2°)
VIDEO
- Driver chip type:MBI 5153
- LED source:SMD 2121 full black
- Pixel pitch:2.6 mm
- Panel resolution:192x192pixels
- Module resolution:96x96pixels
- Luminous flux:1.000nit
- Contrast:3.000:1
- Grayscale:14 bit
- Refresh rate ≥:2.760Hz
- Drive Mode:1/32 scan, constan current
- Vertical viewing angle:120°
- Horizontal viewing angle:120°
- LED density:147.456LED/sqm
- Dead Pixel Ratio:<0.002
- LED avg life span:100.000 h
ELECTRICAL
- Power input/output:Seetronic TRUE powerCON
- Power supply:AC 110/230 V 50/60 Hz
- Max power consumption (panel):160W
- Avg power consumption (panel):53W
- Max power consumption (sqm):640W
- Avg power consumption (sqm):160W
- Standby power consumption (pannello):20W
- Max rated current/panel::AC 220 V / 0,55 A
- Working temperature:-10°C / +45°C
- Working humidity:10~80 RH%
CONTROL
- Receiving card type:A8S
- Other controllers type:rotation, 18bit+, clearview, mapping, firmware copy, RCFGX restore, calibration restore
- Control protocol:Novastar
- Signal input:waterproof Seetronic RJ45
- Signal output:waterproof Seetronic RJ45
MECHANICS
- Other specifics:curve configurations, climbable, rear panel swapping, corner protection for transport, velcro strips for gapless mounting
- Magnetic LED modules:available
- Module size (WxH):250x250mm
- Panel size(WxHxD):500×500×90,6mm
- Vertical hanging system:built-in aliscaf clamp support
- Connection:seamless locking system
- Panel weight:9kg
- Weight per square meter:36kg
- Hanging Panel Quantity ≤:20
PHYSICAL
- IP rating:IP30
- Cooling:fan-free with natural convection
- Housing:Die-cast aluminium housing
- Finish:black
INSTALLATION
- Curve configurations:concave 2°, 5°, 10° - convex 2°, 5°
CERTIFICATIONS / REPORTS
- Compliance:CE, EMC, UL
لا توجد تقييمات بعد.