T20i Architect and Engineer Specifications

T20i
The loudspeaker shall consist of a compact installation enclosure with symmetrical driver arrangement driven and protected by a dedicated powered amplified controller. The loudspeaker shall have a 90 x 50 or 60 x 40 rotatable constant directivity HF horn. The loudspeaker shall be possible to install horizontally and vertically with symmetrical dispersion. The loudspeaker shall feature integrated mounting threads for numerous installation possibilities.

The enclosure shall feature two 10" long excursion neodymium HF transducer with one 1.4" compression driver neodymium with 3" diaphragm. The loudspeaker shall have a exchangeable and rotatable grad constant directivity HF horn, 90 x 50 or 60 x 40.

The usable system bandwidth shall be 60 Hz to 18000 Hz.

Maximum peak SPL shall be 138 dB. The long-term handling capacity shall be 1000 W program and 2000 W peak. The nominal impedance of the loudspeaker shall be 8 Ohm.

The enclosure cabinet construction shall consist of first grade birch plywood. The front of the enclosure shall be protected by a perforated, powder-coated steel with flame retardant and hydrophobic, black fabric to the rear. The dimensions shall be 300 mm (11.81") in width, 600 mm (23.62") in height and 400 mm (15.75") in depth and the enclosure weight shall be 24.3 kg (53 lbs).

The enclosure shall feature eight M10 threads for mounting accessories. The enclosure shall be connected via screw terminal as standard.

The loudspeaker shall be the TW AUDiO T20i.

References
The response curves of the system are available upon request  support@twaudio.com

Manufacturer:
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin, Germany