T20 Architect and Engineer Specifications

T20
The loudspeaker shall consist of a compact installation enclosure with symmetrical driver arrangement driven and protected by a dedicated powered amplified controller. The loudspeaker shall be possible to install horizontal and vertical with symmetrical dispersion.

The enclosure shall feature two 10" long excursion neodymium HF transducer with one 1.4" compression driver neodymium with 3"diaphragm. The loudspeaker shall have a exchangeable and rotatable grad constant directivity HF horn, 90 x 50 or 60 x 40.

The usable system bandwidth shall be 60 Hz to 18000 Hz.

Maximum peak SPL shall be 138 dB. The long-term handling capacity shall be 1000 W program and 2000 W peak. The nominal impedance of the loudspeaker shall be 8 Ohm.

The enclosure cabinet construction shall consist of first grade birch plywood. The front of the enclosure shall be protected by a perforated, powder-coated steel, covered with a flame retardant, hydrophobic and acoustically transparent black 3D mesh fabric. The dimensions shall be 300 mm (11.81") in width, 606 mm (23.86") in height and 400 mm (15.75") in depth and the enclosure weight shall be 24.3 kg (53.6 lbs).

The enclosure shall include internal hardware for rigging and be used in conjunction with dedicated rigging accessories. The enclosure shall feature two integrated ergonomic handles, two carrying handles and four stacking rubber feet. The enclosure shall be connected via two parallel 4-pole speakON sockets. 

The loudspeaker shall be the TW AUDiO T20.

References
The response curves of the system are available upon request  support@twaudio.com

Manufacturer:
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin, Germany