B10 Architect and Engineer Specifications

B10
The loudspeaker shall consist of a compact and leightweight enclosure driven and protected by a dedicated powered amplified controller. The loudspeaker shall be a omnidirectional subwoofer with and without internal passive crossover. The loudspeaker shall available in an active and passive variant. The loudspeaker shall have a optional passive crossover PWB10 with switchable high-pass outputs, bi-amp and passive mode. The loudspeaker shall have a M20 pole mount flange for distance rod.

The enclosure shall feature one 10" long excursion neodymium LF transducer with an uncompromising 3" dual voice coil.

The usable system bandwidth shall be 40 Hz to 400 Hz.

Maximum peak SPL shall be 123 dB. The long-term handling capacity shall be 700 W program and 1400 W peak. The nominal impedance of the loudspeaker shall be at active variant: 8 Ohm (optional 2x 16 Ohm), at passive variant: 2x 12 Ohm or 1x 6 Ohm switchable.

The enclosure cabinet construction shall consist of first grade birch plywood. The front of the enclosure shall be protected by a perforated, powder-coated steel, covered with a flame retardant, hydrophobic and acoustically transparent black 3D mesh fabric. The dimensions shall be 504 mm (19.84") in width, 304 mm (11.97") in height and 440 mm (17.32") in depth and the enclosure weight shall be 16.1 kg (35.5 lbs) and in passive variant with passive x-over 20.1 kg (44 lbs).

The enclosure shall feature two integrated ergonomic handles, eigth stacking rubber feet and a M20 pole mount flange to adopt a distance rod when used with a top loudspeaker. The enclosure shall be connected in active variant via two parallel 4-pole speakON sockets and in passive variant via five 4-pole speakON sockets.

The loudspeaker shall be the TW AUDiO B10.

References
The response curves of the system are available upon request  support@twaudio.com

Manufacturer:
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin, Germany